Graphene Membrane
Material
Model P Max
51 m
Pressure-vessel Series
Finish
Model P
Membrane fiber: PVDF &
Membrane vessel: PVC
Exhaust clamps: 304 Stainless steel
Sealing glue: ABS
Use Model P on common site conditions.
Membrane area
2
77 m
2
Use Model P max on sites with limited footprint.
Dimensions
1860 mm
2360 mm
Length of Model P
Length of Model P Max
225 mm
225 mm
Diameter of Model P
Diameter of Model P Max
Weight
48 kg
Dry weight of Model P
83 kg
Wet weight of Model P
61 kg
Dry weight of Model P Max
100 kg
Wet weight of Model P Max
Flow rate
2.0~4.0 m /h
3
3.0~6.0 m /h
3
Flow rate varies with feed water quality and pressure.
Flow rate varies with feed water quality and pressure.
Pore size
0.02 μm
The normal pore size of Model P and P Max is 0.02 μm while the actual size can be customized between 0.02 to 0.1 μm.
Fiber diameter
0.7 mm /1.3 mm
Inside diameter/ outside diameter
Model P and P Max are packed with homogenous fibers.
pH range
3.0~10.5
Operating pH range of continous feed water.
1.0~13.5
Operating pH range of Clean In Place (CIP).
The temperature of CIP should be no higher than 30 C.
The maximum chlorine concentration (measured as Cl2) should be no higher than 2,000 mg/L.
。
Flow direction
From outside of the membrane fiber to inside of the membrane fiber (Outside-in type of filtration).
TMP
<100 kPa
The maximum Transmembrane Pressure (TMP) should be no higher than 100 kPa. Back washing or CIP should be conducted when TMP is higher than the maximum limit.
The maximum feed pressure should be no higher than 400 kPa. Pressure-control valve should be installed when feed pressure is higher than the maximum limit.
<400 kPa
Feed pressure
Backwashing
80 L/m ·h 200 kPa
2
The flow rate and pressure peremeters of backwashing pump.
Air blowing
0.1~0.15 Nm /m ·h 30-50 kPa
2
3
The flow rate and pressure peremeters of air blower.
Operating flux
20~50 L/m ·h
2
Landfill leachate treatment;
Industiral wastewater treatment;
Domestic wastewater treatment;
Desalination pre-treatment.
30~100 L/m ·h
2
Drinking water treatment;
Industiral feed water treatment.
© 2019 埃隆水处理技术（上海）有限公司
Elon Water Treatment Technologies (Shanghai) Co., Ltd.
Floor#9, 115 Xinjun Rd.
Shanghai, China P.R.
200001
Elon Water Treatment Technologies LTD
63-66 Hatton Garden
London, England
EC1N 8LE
Contact Information:
Email: info@elonwater.com Phone:+86 021-31255166
All text, graphics, user interfaces, visual interfaces, photographs, trademarks, logos, sounds, music, artwork and computer code (collectively, "Content"), including but not limited to the design, structure, selection, coordination, expression, "look and feel" and arrangement of such Content, contained on the Site is owned, controlled or licensed by or to Elon, and is protected by trade dress, copyright, patent and trademark laws, and various other intellectual property rights and unfair competition laws.
Except as expressly provided in these Terms of Use, no part of the Site and no Content may be copied, reproduced, republished, uploaded, posted, publicly displayed, encoded, translated, transmitted or distributed in any way (including "mirroring") to any other computer, server, Web site or other medium for publication or distribution or for any commercial enterprise, without Elon’s express prior written consent.
You may use information on ELon products and services (such as data sheets, knowledge base articles, and similar materials) purposely made available by Elon for downloading from the Site, provided that you (1) not remove any proprietary notice language in all copies of such documents, (2) use such information only for your personal, non-commercial informational purpose and do not copy or post such information on any networked computer or broadcast it in any media, (3) make no modifications to any such information, and (4) not make any additional representations or warranties relating to such documents
